Air conditioners customers see on their own wall before installation
GREE Hungary did not take a single photo or handle a single 3D file. We photographed their air conditioners in their warehouse, built a 3D twin of each one, and put them on their product pages with AR and measurements. The models are still live, and GREE's resellers use them during on-site surveys too.
- Client
- GREE Hungary
- Industry
- Air conditioning, sold through a reseller network
- What they got
- 3D product models, AR view, measurements, 3D marketing animations, a Christmas film
- GREE's effort
- Adding one script to the website
- Started
- December 2025 – the 3D products have been live on the website ever since
An air conditioner is no longer just a machine, it is part of the home
People look at an air conditioner in their living room or on their wall for years. So buyers don't only ask how well it cools, but also how it will look where it goes. A product photo can't answer that.
On site, buyers have to imagine it
The same question comes up during the on-site survey. The installer points to where the indoor or outdoor unit would go, but the buyer has to imagine how it will look. If they don't like it after installation, it is hard to change.
No extra work allowed
GREE was also clear that the project should not create extra work for their own team. No photo shoots, no file handling, no development.
From the warehouse to the product page, for GREE
We photographed the units in their warehouse
We drove to GREE's warehouse in Budapest. Their team had set aside the units they wanted in 3D. We unpacked, photographed and repacked every one of them. The whole thing took a few hours.
The photos are simple phone shots
No studio or professional photographer is needed: the pictures are only references for our 3D studio.




Our 3D studio built a digital twin of every unit
From the photos and the product data, our studio built a dimensionally accurate 3D model of every unit. These models became the basis for everything that followed.


One script, and the 3D button is live on the product page
GREE had one job: add a short script to their website. No 3D specialist was needed for that. From then on, we placed the 3D button on the product pages, connected the right model behind it, and we have run it ever since.
Holostep 3D buttonWe put these in placeand we have run them ever sinceBehind the button, the buyer can:
- 01 · 3D viewRotate itturn the unit around 360°,
- 02 · MeasureCheck the sizecheck its real dimensions,
- 03 · ARPlace it on the wallplace it on their own wall in AR with the phone camera, at real size.
The same models became marketing too
GREE liked what the models could do, so we took the collaboration further.
- 3D marketing animations,
- informative product videos,
- and that year's GREE Christmas film.
They ran on GREE's website, YouTube channel, Facebook page and in Facebook ads.
Not just good-looking, it helps people decide
At home, buyers place the unit on their wall with their own phone and see how it looks. They have fewer questions and choose with more confidence.
On site, with the resellerGREE's resellers bring their phones to the on-site survey. In AR, at real size, they place the unit exactly where it would be installed. The customer decides right there whether they like the spot, before any drilling.
So the 3D product is not just decoration on the website. It supports the purchase from the first click to installation.
This is how managed the service can be
| Task | GREE | Holostep |
|---|---|---|
| Setting aside the units in the warehouse | ||
| Photos, unpacking and repacking | ||
| Building the 3D models | ||
| Adding the script to the website | ||
| Placing the 3D button on product pages | ||
| Connecting models, AR, measurements | ||
| Hosting and operation | ||
| Marketing animations, product videos, Christmas film |
If a company has the time and people, it can take the photos itself with a phone. If not, we do it.
One model, many channels
We filmed the whole journey
We made a short video of the whole process: the drive to GREE's warehouse, unpacking and the phone photos, the work in our 3D studio, all the way to the unit appearing on the product page and on the wall in AR.
The same story as above, in one minute and easier to take in. The video is in Hungarian; if you're curious, you can watch it here.
See it with your own products.
Your customers compare several suppliers. Whoever shows them exactly what they’re looking for first starts with an advantage.
In a short call, we’ll show you how your own products would work with Holostep, and tell you the effort and the price.
- 15, 30 or 60-minute call in English
- No obligation
- We show it on your own products
- No IT project needed

Choose a 15, 30 or 60-minute slot.
Open in new tabLoading form…